Відео

Amazon carries the enclosure kit now. I bought mine from aliexpress but would have preferred amazon.

working fine isnt good enough that printer could be amazing if u install the klipper mod

the correct version is Orca slicer 2.0.0-rc

My test cube didn’t print either 😂

I mean by the looks of the way 3d printers are going, looks like the market is down. No one seems interested anymore, and they are either too expensive or very cheap because no one wants them. This machine needs to be 100 dollar cheaper, then I could see myself buying one. A lot of 3d printers are so cheap right now, they are all going down in price all the time.

You will have your enclosure made before mine arrives, do you think it will be capable of printing nylon?

I haven't had to use any glue or Hairspray on my printers since I started and I started with a cheap Kobra neo I have the AD5M an A1 and mini and Q1 pro never had problem with sticking with any type of filament, you may need to update your firmware if you didn't already

Me fue de mucha ayuda el video. Gracias desde Argentina.

You have to train her that the zap means no and yes they have more layers of skin than us which is why they can endure more pain than a human

I am still waiting for mine to be delivered, can't wait to try it.

I just got mine about 4 days ago and I'm having a lot of failed prints it's just the language I don't understand but I hope to learn just like you man ! Keep up the good work😊

Those tolerances are spot on! If you have the step files maybe creating your own STL and slicing that might be the way to go. Or check out the STL in Orca by using the fix command, I have had some bad mesh data in STL files before and the fix repaired it.

A5m pro is a waste of $$$$$ and u made a great choice fantastic printer for the $$$$

I like to put my filament on a spool

LET THE MACHINE RUN ITS CYCLES

Make sure you check off the level bed box every time before you start your print YOU WILL HAVE 100% SUCCESFULL PRINTS. you will see the little box where the start print screen is. prints take a little while to start be patient and it will start. the printer has its cycles it goes thru. other brand printers like bamboo take even longer

Search up Orca-Orca-Flashforge, Its a fork of Orca by Flashforge, it works seamlessly with the 5M on stock firmware,

I get 1 or 2 printers every year, and I purchased the flash forge 5m. My last two. The kobra neo and neo 2. While decent printers. But I would easily replace both of those with another 5m. If I had not already purchased them this last Christmas. The flash forge 5m is so much faster. Even after install klipper on my Neo's. The quality of the prince are great. And it looked like a finished product. Have you tried Rapid PLA? It is my new favorite for high speed printers. I did do one thing and buy a stylus at the dollar store for the screen. That helps a lot.

That little Flashforge printer seems to be a very nice unit, especially for the price. If I hadn't bought an QIDI X-Plus3 last summer to augment/replace my older Geeetech A20M, I would definitely be looking at that unit. The Qidi has a slightly bigger build volume, but not much, and I don't print large objects (or at least not often). It looks like your printer is running on Klipper, like mine, and I also added a camera...plug and play, just like yours did. Looking forward to your modification journey...

Thank you very much this video was very helpful for my 3D printer

I read somewhere that the PLA+ filament has a bit of TPU added to it, this apparently makes it more fluid. Before I got my X1 Carbon I had tried Orca slicer but I had got so used to Cura it was hard for me to use anything else, I was forced to use Bambu Studio and Orca Slicer and now I love using Orca Slicer. You should check to see if your camera works with Orca, you will need to press the little play button under the video screen on the Device page of Orca Slicer and switch the setting to HD if your camera supports 1080P, the default is 720P. Orca handles the video in real time with no latency! You know chuck it still amazes me how fast these new printers can print and yet the quality is just awesome, I guess it's because of the PAP turbo cooling fans and well part coolindesigbedg fan ducts. You should slice some of those parts for your old printers and see what the time difference is, Im guessing that first part would take around 2.5 days

I needed to get a printer that was much faster than my existing cartesian printers and that could print high-temp materials, I was sick of Creality machines having issues that they never fixed and so I decided to go high end and I bought a Bamu Lab X1 Carbon Combo.I was impressed that they do regular updates to the FW and SW, and the reviews were very good also. The printer is awesome, it just works and the quality of the prints are perfect! That spool holder on yours looks very small! and it sounds like those leadscrews need lubricating. I sprayed a concrete paver with Plasticoat and placed that between the printer and the desk, it helps massively!

Will it function with a Lithium Iron Phosphate battery?

Can you use a more popular 3" blade on this? Thanks!

Try to

I checked my V69 and the crown doesn't change the faces like yours, whether it's a setting or if they have made a change to the software I'm not sure, but it def doesn't do what yours does.

Can this wire trace with the top probe piece?

I think it's funny that they claim it has ball bearings inside it. It does not. Apparently, they don't know the difference between ball bearings and roller bearings, LOL! Their pictures on Amazon show the roller bearings quite plainly but mis-label them as ball bearings.

hf nr 58957 🎉🎉

Thanks for the review!

you have the tool upside down. It will rest with wire up if you turn it around.

Will it cut painted sheet metal

Recently i noticed that when im playing games on my Ps4, the response time is delayed and the games dont feel smooth anymore... I've been searching for solutions but i havent found one yet... Also the modes are confusing me... Like which of em makes my games smooth and removes the delay? 😭

This is some pretty cool resin! Could definitely be used in place of TPU

Would this work relatively on a 2001. Mine goes into drive, reverse, and neutral. But when it runs, it makes a sound almost like I'm pushing the gas pretty hard but I'm not. And it won't even manually go to 2nd. I don't know what gear it's stuck on, but I do know I'm screwed.... please help

Chuck, I believe that you are the guy who would know this. Perhaps others too. So a while back, I landed one of these MIG 130 (flux) welders. I got it for free because the store I deal with, is amazing. I know the manager and I was asking if they had any used MIG welders as, being an electronics tech, I was looking for something to see if I could fix it. She brought out a brand new one that was sold to a customer and when he opened it, the motor didn't kick in to move the wire along. So she just gave it to me because if she sent it back to the warehouse, they'd just crush it anyway. So I get it home and test it and sure enough, pulling the trigger does not turn on the motor (no power). I checked the trigger switch and it's fine. So, being the techy type, I traced what voltage the motor runs on and applied the voltage right to the motor. The motor spun up no problem and pushed the test wire through without issue. So I realize, it's probably a MOSFET or related circuitry. But here's my question to you as I figure, you'd know this being that this is what you do. On working MIG 130 (similar to what you show here, with just the voltage and feed knobs), if you just want to test the motor, WITHOUT PUTTING A SPOOL IN, if all is r (without the spool in it??) I'm hoping that the answer is yes, because then that makes testing a lot easier. When I got it and ran tests, it was a pain to rewind the wire the it pushed out, back onto the spool. LOL *So please let me know if, without a spool in it and NOT trying to spark it up, should the motor start when trigger pulled?* Thanks in advance. I really appreciate it.

I found this because I was struggling to figure out the adjustment as well. Nice video!

Love the review. I'm learning about the tool, myself.

Closest I have got was ABS raft with POM on top. ABS juice might work.

Thanks bud, looking for the next one

Does it have an option to keep the screen always open?

Thanks for the video...how is the speaker and call quality?

This will save so much time.

Great video, thanks.

Your a halfway decent welder for an old Fart lol just kidding, I'm almost 70 been welding 60 years or so love watching welding videos, love it your a simple man with a lot of common sense! . Watched this (professional) welder he called himself . his big opinion was if you're not using gas don't bother, stick option don't even try, my stick welding is just as pretty as any mig welding & stronger & I can weld outside in windy conditions. Great video old timer keep it coming!!! I bought the Vevor 270 for my service truck power it with a Wen 11k Watt generator weld half inch steel no problem. Thanks Trader Jack

how wide did it end up being between top corners ,

Thanks for doing the review! I'm a retired steelworker who was looking for a cheap stick-welder & bought a Simder arc 200 from someone. If it allows me to burn hot enough to use up to 1/8" 7018, it'll serve it's intended purpose. Single knob on unit;I'll have to see if the amp control can be depressed for other settings; thanks to you addressing that feature. Then, again, I only paid $50 canadian - equal to about 50 cents U.S. 🙄 - so, I'm "hoping", not "expecting".

Caught it on clearance for $24 w/o battery. WOW! Already got my money worth out of it.

You can get a band. The Kospet website has one for you if you bought it from them, and if you bought it from Ali Express the official Kospet store there has one for you.

You said you can use 3d printer , have you tried it ? Or found any band strap that can fit with x1 ?